Mt2 Series Mt2 Detailed Printer Specifications Printing Specifications Printing Method: Direct thermal Printing Resolution: 203 dpi (8 dots per mm) Printing Speed: 2" (50 mm) per second maximum Fonts/Graphics/Symbologies Fonts: 7 Courier Font sizes including one rotated, downloadable fonts Character Set: ASCII International and IBM graphic sets Graphic Print: Bit addressable graphic command set; Bar codes 39,128, 2 of 5, and UPC. Downloadable fonts, graphics, logos and additional bar codes Characters Per Line: 24, 32, 38, 40, 42, 48 (s/w command) Character Size: 3x2, 3x1.5, 3x1.15, 3x1(H x W mm) Print Contrast: Auto and user selectable Communications Interfaces: RS232C-RJ11 type and Infrared (IrDA) standard, Bluetooth ® Baud Rate: 2.4k. 9.6k, 19.2k, 38.4k baud Fast IrDA Transfer Speed: Up to 38.4k depending on computer capability Standard IrDA Transfer Speed: 9600 connect and transfer Handshaking: CTS/RTS and/or XON/XOFF Print Media Paper Type: Direct Thermal Roll, use Printek high quality 25 year archival rated paper for best results Roll Size: Maximum roll diameter 1.5″ (3.8 cm), roll width 2.25″ (5.7 cm) Roll Capacity: Approx. 60′ (18.3 m), Approx. 120 6″ long receipts Core Size: 0.375″ (9.5 mm) Power Management Power: Removable rechargeable battery; DC input power jack for optional AC Adapter Battery: 2 cell Lithium Ion, 7.4V; 2200 mAH Battery Recharge: Internal fast 180 min., fast charge with auto switch to trickle charge; spike and surge protection Paper Rolls Per Charge: >6 (over 800 6” receipts per charge) Advanced Power Management: Battery saving Auto OFF feature with adjustable delay. Sleep mode with wake on data feature (standard model) Operator Controls and Indicators Status Indicators: 3 LEDS (2 multi-functioning) — Power/Lo Bat., Charging, Fault/MCR Ready User Buttons: 2 buttons— ON/OFF, Feed Paper-out Detection: By photo interrupter Physical Specifications W x L x D: 4.2 x 5.4 x 2.7" (11 x 14 x 7 cm) Weight: 12 oz. (0.34 kg) empty; 16 oz. (0.44 kg) with bettery Environmental Specifications Operating Temp: 14 to 122°F (-10 to 50°C) Storage Temp: -4 to 140°F (-20 to 60° C) Humidity: Up to 90% RH (non-condensing) Drop Test: 3’ to concrete Agency Approvals: FCC Part B; CE, AS/NZ3548 Class B, CB Certified; ETL Listed, Control #3046813, meets IP54 standard Memory 32kb SRAM, 128kB Flash Software Windows 95, 98, 2000, and XP printer drivers; .NET support; Windows CE and Pocket PC print utility and SDK from Fieldsoftware and Bachmann Software; Palm O/S print utility and SDK from Bachmann or Stevens Creek Software Warranty One-year printer warranty on the entire printer — case, battery, and print head included Options and Accessories 3-track Simultaneous Read Magnetic Card Reader AC Adapter Spare Battery (Li-ION; 2200mAH) 2-bay Fast Charger In-Vehicle Adapter (12V or 24v) Coiled Data Cable, Terminated (Db9) Coiled Data Cable, Unterminated Environmental Case Shoulder Carrying Strap Belt Loop System (included as standard in basic unit) Media High Quality Thermal Receipt Paper – 25 Year Archival Rating